Saint-Gobain Weber
Stand B13
We specialise in the manufacture of industrial mortar products including technical mortars, renders and decorative finishes, tile fixing products, floor screeds and external wall insulation systems.
Based on our strong expertise of industrial mortars, we offer a complete solution including services which complement our products including technical support and training. Our training programmes meet the needs of our customers, providing specifiers, developers, and contractors with substantial support before, during and after contract periods.
Products
webercem advanced repair concrete
A pre-blended cementitious repair concrete which complies with the National Highways Specification for Highway Works white book Series 5700 Structural Concrete.
Conformity testing to BS EN 1504-3 has confirmed that webercem advanced repair concrete meets the requirements for a Class R4 repair product.
Permanent structural repair concrete
Contains non-reactive aggregates and a low soluble alkali cement content
The repair concrete can be applied to a range of thicknesses, minimum 25mm
Rapid strength development 35MPa in 3 days thus reducing repair possession times
Dimensionally stable, forms an integral bond to existing concrete and restores structural integrity with proven durability
Economical repair
Variable application thickness providing flexibility of use
Free-flowing recasting repair concrete allowing formation of intricate falsework
Ideally suited in structural elements where reinforcement is congested
Shrinkage-compensated to avoid shrinkage cracks and enhance durability
Class R4 repair product meeting the requirements of BS EN 1504-3
webercem advanced precision grout
webercem advanced precision grout is a premixed cementitious grout developed for applications where an economical grout with good flow and strength is required. webercem advanced precision grout is based on specially selected Portland cements, graded aggregates and admixtures including a special form of carbon.
webercem advanced precision grout is designed primarily as a flowing grout but can also be used at a trowellable or dry pack consistency.
Complies with BS EN 1504-3 and -6.
webercem advanced precision grout is shown to be effectively non-shrink by Early Volume Change of Cementitious Mixtures which, unlike other methods, measures expansion or shrinkage from time of placing
Volume expansion when unrestrained is greater than 1.0%
Precision grout suitable for use over a range of temperatures and site conditions
Can be pumped, poured, trowelled or dry packed
Thermal expansion similar to that of good quality concrete
Good flow properties
Can be applied in thicknesses from 10mm to 100mm
Does not significantly lose workability during pot life
webercem advanced repair concrete CP
A pre-blended cementitious, high-strength flowing repair concrete. Contains non-reactive aggregates and a low soluble-alkali cement content suitable for use where cathodic protection will subsequently be used.
Conformity testing to BS EN 1504-3 has confirmed that webercem advanced repair concrete CP meets the requirements for a Class R4 repair product.
Excellent electrical resistivity for cathodic protection systems
Rapid strength development thus reducing repair possession times
Dimensionally stable, forms an integral bond to existing concrete and restores structural integrity with proven durability
Economical repair
Variable application thickness providing flexibility of use
Does not contain microsilica
Total water-soluble sulphate content of concrete, SO3 - does not exceed 4%.
Complies with NH specification for use on highway structures
Free-flowing recasting concrete allowing use in areas of congested reinforcement
Class R4 repair product meeting the requirements of BS EN 1504-3
webercem advanced precision grout SP
webercem advanced precision grout SP is a premixed cementitious grout similar to standard webercem advanced precision grout, developed for applications where an economical grout with good flow, retention of flow and higher strengths is required.
webercem advanced precision grout SP is based on specially selected Portland cements, graded aggregates and admixtures including a special form of carbon.
webercem advanced precision grout SP is designed primarily as a flowing grout but can also be used at a trowellable consistency.
Meets Highways England Specification for Highway Works, Vol. 1, Clause 2601. Complies with BS EN 1504-3 and -6.
Complies with HE Specification Clause 2601.4 at 5°C and 20°C
Precision grout suitable for use over a range of temperatures and site conditions
Can be pumped, poured or trowelled
Thermal expansion similar to that of good quality concrete
Excellent flow properties
Can be applied in thicknesses from 10mm to 100mm
Does not significantly lose workability during pot life
High initial and long term strength development
webercem R4 duo
webercem R4 duo is a single-component, polymer-modified, high build cementitious mortar, designed for structural concrete repairs. It requires only the addition of clean water to produce a low permeability, high strength mortar for both soffit and vertical repair situations as well as levelling solutions.
This product has been formulated to comply with the requirements of BS EN 1504-3 as an R4 mortar. Can also be used as a fairing coat tested to BS EN 1504-3, when appropriately prepared.
Dual purpose product that can be used as a repair mortar and/or fairing coat
High build properties – up to 75mm vertically and 75mm in an overhead repair, without formwork when used as an R4 mortar
Easy to apply, with excellent application properties
When used as a fairing coat 3mm of coverage provides as much protection against CO2 diffusion as 30mm of low permeability concrete
Uses
Structural concrete repairs, particularly where high, overhead repairs are required
Repairs to concrete structures and members such as bridges and coastal assets
As a smoothing treatment for concrete surfaces